- - - KMW Rifles Ready To Ship - - -

SENTINEL  S.W.S.    * These rifles can only ship to U.S. based F.F.L.


I have several KMW SENTINEL rifles built and ready to ship.   Rifles in this group are not standard SENTINELs in that they are part of a run of rifles that specified M.I.R.S. multi-mission rails instead of my standard integral rail and MUNSter NV mount.

                      This is a one time group of rifles that I will not be repeating. 

Job Number: KMW - WO - 1103 

          There were 7 of these built*.  CALL or E-Mail to confirm.

                                                         *As of 7/29/16 there are now 4 available


This group of rifles was required to mount the M.I.R.S. Multi-Mission rail.  Accordingly, the actions had to be ordered to spec and could not include the usual Integrated 1913 Scope Base. 

Weight:   Total weight of this rifle as shown above is 12.4 pounds.


The actions on this group are SENTINEL Mk-1 short actions produced by Defiance Machine in Montanta but are a variant of their Rebel action rather than the usual Deviant action.    This action was ordered with oversize 8-40 scope base screws and double pinned recoil lug.  The front barrel tenon thread section is also 0.250" longer than normal Remington style tenons for stiffer barrel matting.


Some of the main features of this action are: 

      Rem M700 style footprint.   Bolt to receiver fit is spec'd to KMW dimensions for reliable function under severe conditions.

      Double Pinned .250" recoil lug.  Surface ground on both faces.

      23% longer barrel tenon thread increases engagement and rigidity. 

      Heavy duty, side mounted bolt release.

      Heavy duty Mini-16 Extractor.

      Bolt handle base is machined integral to the bolt body so there are no welds or brazing to break.

      KMW Gen II Handle.



#14 Heavy Palma Contour.  Stainless 4 groove with 1-11" twist rate supplied by  Krieger Barrels

Chamber is precision cut .308 Win.  Spec is KMW Duty / Match.

Barrel length is 21 inches.

Muzzle is threaded 5/8-24 TPI and is capped with an AAC-51T flash hider/adapter as a thread protector.



Triggers are Timney Manufacturing Model 510 adjusted to 2.0 pounds.



SENTINEL Combat Stock designed by KMW.  The raw stock bodies are manufactured by McMillan Fiberglass Stocks in Phoenix, AZ.  Each stock then has all hardware installed and additional cuts made by KMW to make it build ready.  This stock design was developed over a period of 4 years.  It includes input from top competition shooters as well as Law Enforcement agencies from different parts of the country.

Stocks in this group are solid O.D.Green color. 

Precision machined Integrated Mounting Block in lieu of conventional bedding. 

LoggerHead adjustable cheek piece hardware, Adjustable KMW Length of Pull spacer system and KMW designed DBM bottom metal. 

Gen II Limited Rotation Flush Cups at 5 positions.

Convertible bipod station with Harris Plate and 1913 Pic Rail.

1 - 5rd Accuracy International AICS magazine



Bolt Body, Firing Pin, Extractor and Cocking Piece are coated by I.H.I. IonBond with a dark gray DLC finish for extreme durability and low maintenance.


Balance of metal components are coated Graphite Black in house with CeraKote "H" series ceramic hybrid finish. 


Left side of receiver
top of barrels
Right side of receiver
receiver marking


All rifles go through thorough initial inspections.  Bore break in is done and all rifles are tested for accuracy as well as function  before release for delivery to the client.  All SENTINEL S.W.S. are guaranted to group 1/2 M.O.A. or better @ 100 yds with match quality ammunition. Each rifle must fire 3 consecutive 3-shot groups < 1/2 M.O.A. on one test target to be released for delivery.  This ensures that I have a healthy rifle and you are not getting "cherry picked" groups.


If your rifle fails to perform, I will fix the problem part at no charge unless there are obvious signs of neglect or abuse.  My name is stamped on every rifle because I think a rifle smith or business should be accountable for the work being delivered.  All of my rifles are built to be used!  I do not ship a rifle unless I would be willing to bet my own skin on it. 


All work is guaranteed.


7 rifles are complete and instock for immediate shipping.

Call or email to check availability.   I can only ship direct to U.S. based F.F.L.    On site pickups can be arrainged with proper notice.

Payment can be made with check or money order drawn on U.S. bank.

  VISA and MasterCard can also be used but will incur a 4% surcharge for bank processing fees.



PRICE:  $4,680.00 U.S.D.

Copyright 2015 KMW.  All Rights Reserved.   Rev. 9/2019